TLR 22SCT Build – Part 10 – Body, Wheels and Tires

The Build – Part 10
In Part 10 we finish up our Losi 22SCT build; the body, the wheels and the tires. Four quick steps…let’s get to it!

Build Notes:
You’ll be using CA glue to bond the tires to the wheels. Be VERY careful with this glue; it bonds fingers to objects just as well as it does the tires!

The 22SCT doesnt’ come with tires simply because Losi isn’t sure where you’ll be running your truck. Letting you choose your own tires helps keep the cost of the truck down (since you may never use the tires they provide anyway).

For rubber, I went with AKA Handlebar tires all the way around. These should work great on the surface I’m running on. I also chose to use the beadlock style rings instead of the dish covers. I do like the dish covers more, but I’m dying them red to match the truck.

After mounting the tires (see my Tire Mounting How To), slide the front tires onto the axles and secure with the 7mm locknut.

Follow the same instructions as above for the rear tires.

Finally, paint your body and mount it up. Use the 4 body clips to secure. You can raise and lower the body by raising or lowering the body mount posts. For those of you that like to cut the body out (to keep air flowing through it), you can see I did that on this Proline body (see my How to Prep a Short Course Body).

That’s it, you’re done! Now get your 22SCT out to the track and show the competition what’s up!

Back to the TLR 22SCT Build List