After posting a video of my Traxxas 4-Tec 2.0 in Rally trim, I’ve received a lot of questions about what I did to make this car. It’s quite simple, actually, but decided to do a …
Read More »RC Build Blog
Video – Tamiya TA08 Pro Build Part 1 | CompetitionX
Welcome to Part 1 of the Tamiya TA08 Pro online video build. In this video we start off the build with the list of suggested tools, a quick run-through of the manual as well as …
Read More »Video – Tekno ET48 2.0 E-Truggy Build Part 6 | CompetitionX
Welcome to Part 6 of the Tekno ET48 2.0 online build. This is the final video in this Series where we wrap up the build – the final assembly bits, body, rear wing, wheels, tires …
Read More »Video – Tekno ET48 2.0 E-Truggy Build Part 5 | CompetitionX
Part 5 of our Tekno RC ET48 2.0 build series is all about the shocks – the build of the front and rear dampers as well as installation. It’s a pretty simple step, especially since …
Read More »Video – Tekno ET48 2.0 E-Truggy Build Part 4 | CompetitionX
In Part 4 of our Tekno RC ET48 2.0 build series, we assemble the steering system, attach it to the front clip and add that to the chassis. We’ll also be installing the rear clip …
Read More »Video – Tamiya Comical Hotshot GF-01CB Unboxing | CompetitionX
The Comical Hotshot is the newest 1/10 scale ride on Tamiya’s GF-01CB chassis. It features a 4WD drivetrain, large over-sized knobby tires, oil-filled shocks and a cool little comical body based on the original Hotshot …
Read More »Video – Tamiya TA08 PRO Competition Touring Car Unboxing | CompetitionX
A new competition level Touring Car from Tamiya has dropped – the TA08. This ground-up design has some interesting features – a narrow, Stepped-V chassis that helps eliminate chassis touchdown during hard cornering, a dual-belt …
Read More »Video – Tekno ET48 2.0 E-Truggy Build Part 3 | CompetitionX
In Part 3 of this multi-part Tekno ET48 2.0 build series, we take you through the steps of building the entire rear clip – bulkhead, anti-roll bar and suspension. Since we skipped around a bit …
Read More »Video – Tekno ET48 2.0 E-Truggy Build Part 2 | CompetitionX
In Part 2 of this multi-part Tekno ET48 2.0 build series, we take you through the steps of building the entire front clip – bulkhead, anti-roll bar and suspension. To complete the entire front end, …
Read More »Video – Tekno ET48 2.0 E-Truggy Build Part 1 | CompetitionX
In Part 1 of this multi-part build series, we take you through the opening steps required to build the Tekno RC ET48 2.0 1/8 Scale E-Truggy. We’ll introduce you to the car and list the …
Read More »