Thursday , 21 November 2024

AVID RC Carbon Fiber Parts – Team Associated RC8B3.2 | CompetitionX

AVID RC Carbon Fiber Parts - Team Associated RC8B3.2 | CompetitionX

AVID RC has released 5 new carbon products for Team Associated’s RC8B3.2. Let’s take a quick look at each of them.

AVID RC Carbon Fiber Parts - Team Associated RC8B3.2 | CompetitionXAVID RC RC8B3.2 Carbon Fiber Rear Arm Inserts
These inserts attach to pockets in the rear suspension arms to control the flex and twist of the part. They are made from 2mm carbon fiber and attach using with small screws. These are a great tuning aid for added responsiveness at the rear of the car.

AV1828-R AVID RC RC8B3.2 Carbon Fiber Rear Arm Inserts

AVID RC Carbon Fiber Parts - Team Associated RC8B3.2 | CompetitionXAVID RC RC8B3.2 Carbon Front Arm Inserts
These inserts attach to pockets in the front suspension arms to control the flex and twist of the part. They are made from 2mm carbon fiber and attach using with small screws. These are a great tuning aid for added responsiveness at the rear of the car.

AV1828-F AVID RC RC8B3.2 Carbon Front Arm Inserts

AVID RC Carbon Fiber Parts - Team Associated RC8B3.2 | CompetitionXAVID RC RC8B3.2 Carbon Upper Front Arm Inserts
These inserts attach to pockets in the upper front suspension arms to control the flex and twist of the part. They are made from 1mm carbon fiber and attach using with small screws. These are a great tuning aid for added responsiveness at the rear of the car.

AV1828-FUR AVID RC RC8B3.2 Carbon Upper Front Arm Inserts

AVID RC Carbon Fiber Parts - Team Associated RC8B3.2 | CompetitionXAVID RC RC8B3.2 Carbon Shock Tower Set
These shock towers are cut from 5mm carbon and are direct replacements for the stock parts. They have chamfered cutouts one both sides to help prevent splitting during a crash. They retain all of the same tuning options as the stock towers.

AV1830-SET AVID RC RC8B3.2 Carbon Shock Tower Set

AVID RC Carbon Fiber Parts - Team Associated RC8B3.2 | CompetitionXAVID RC RC8B3.2 Carbon Steering Block Arms +2
Made from 2.5mm thick carbon fiber, these parts attach to the steering arms and add +2° of Ackermann to the steering. They allow the inside wheel to achieve a larger angle to reduce scrub and allow the vehicle to rotate better in the corner.

AV1829 AVID RC RC8B3.2 Carbon Steering Block Arms +2

For more information, please visit: www.avidrc.com

Check out AVID RC products at AMain Hobbies.

Check out more cool products from AVID RC on CompetitionX.

Make sure you visit and subscribe to our YouTube Channel (CompetitionX YouTube) for up to date videos on all the current products!

Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!

#avidrc #rccars #competitionx

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC is extending their product selection, this time with a full line of wheel …