Thursday , 21 November 2024

Duratrax Evader™ Brushless 2.4GHz RTR

Duratrax Evader™ Brushless 2.4GHz RTR
Duratrax Evader™ Brushless 2.4GHz RTR

“Get dirty” with a new take on a popular Duratrax legend! The 1/10 scale Evader Brushless 2.4GHz Ready-to-Run combines unmatched power and control with the toughness and durability you expect from Duratrax. The 2.4GHz radio system is made by Futaba® – the leader in state-of-the-art control. It comes with a waterproof SX400WP steering servo and a 2-channel receiver that can be used with all Futaba FHSS surface systems, including the 2PL, 3PL, and 4PL. The power system consists of a 3930kV brushless motor and a waterproof 100A brushless ESC with forward, reverse, brake and LiPo cutoff. Other highlights include a waterproof radio box, a factory-installed wheelie bar and full ball bearings. Evader upgrade compatibility makes its hop-up potential virtually unlimited!

• Duratrax 3930kV brushless motor for blistering top-end speeds and superior torque.
• Waterproof 100A brushless ESC with forward, reverse, brake and LiPo cutoff.
• Duratrax 2.4GHz radio system by Futaba includes a 2-channel receiver inside a waterproof receiver box and a waterproof SW400WP steering servo. Compatible with all Futaba FHSS systems, including the 2PL, 3PL and 4PL.
• Factory-installed wheelie bar.
• Full set of ball bearings, for reduced friction and increased durability.
• MagnaFlex™ parts are rugged, rigid and protected by the 1-Year Stress-Tech Guarantee!

Specifications:
Length: 18.5 in (470 mm)
Width: 12.8 in (325 mm)
Height: 6.1 in (155 mm)
Weight: 3.6 lb (1633 g)
Requires: 6-cell 5000mAh NiMH battery with Deans® Ultra Plug® connector & (4) “AA” batteries.

DTXD37BB 1/10 Evader Brushless 2.4G RTR Blue Retail: $399.99 Street: $249.99
DTXD37LL 1/10 Evader Brushless 2.4G RTR Black Retail: $399.99 Street: $249.99
DTXD37RR 1/10 Evader Brushless 2.4G RTR Red Retail: $399.99 Street: $249.99
DTXD37YY 1/10 Evader Brushless 2.4G RTR Yellow Retail: $399.99 Street: $249.99

The Evader Brushless 2.4GHz RTR will be available early November.

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC is extending their product selection, this time with a full line of wheel …