HB D216 2WD Offroad Buggy

HB’s D216 has been spotted a quite a few races lately, however when pressed for a release date, the HB team had ‘no comment’. Well, that day appears to be getting closer as HB has just released a slew of info about this long awaited 2WD buggy.

It will be based on a MM (mid-motor) design, perfect for all the high-grip racing tracks that are popping up. The backbone will be carbon fiber and will features several different, adjustable battery positions. Carbon fiber side braces are also utilized to help control flex. The D216 will use a 3-gear transmission, threaded, 12mm Big Bore V2 shocks, roll on a full set of bearings and include all the must-have tuning adjustments: camber, track width, ride height, multiple camber links, etc.

Here’s a quick list of the features HB has included with the D216:
• Mid-motor 2WD fully-featured racing buggy kit
• Woven graphite carbon fiber chassis with carbon fiber side braces
• Centralized low weight distribution
• Superb chassis balance with increased transitional agility
• Fully enclosed 3-gear mid-mounted transmission
• Triple plate externally adjustable large diameter slipper clutch
• Multiple battery mounting positions to adjust weight balance – adjustable fore and aft as well as left to right
• Brand new 2-piece adjustable caster blocks to change kingpin angle
• Monococque suspension arms with innovative hinge boss design
• Aluminum camber link plates
• Threaded aluminum 12mm Big Bore V2 coilover shocks
• Extra-rugged triangulated shock tower mounts
• Fully adjustable suspension with sway bars, multiple camber links, track width, ride height
• Multiple servo mounting options to adjust weight balance
• Steel turnbuckles with extra-long rod ends for increased durability
• Extra-large gear differential
• Easy-access differential
• HB universal dogbones
• Aluminum hex wheel adapters
• Completely fitted with ball bearings
• Hook and loop body mounting
• Adjustable wing height
• Parts compatibility with the D413, including shocks, rear hubs, CVDs, wing mounts, arm mounts and more
• Wide array of tuning options include longitudinal battery mounting set, ball differential, long wheelbase chassis, multiple Ackermann arms, rear wings, shock springs, rear shock tower and arm mounts

Specification
• Overall width: 250mm
• Wheelbase: 282mm (adjustable)
• Supplied in kit form only, assembly required
• Requires motor, battery, speed controller, wheels, tires, radio system with 1 servo

This is an exciting release from HB, being their first competition-grade 2WD buggy! We’re excited to get our hands on one of these!

#116155 HB D216 2WD Offroad Buggy

[source: www.hpiracing.com]