Thursday , 21 November 2024

Losi Limited Edition Mini 8IGHT RTR 4WD Buggy

Losi Limited Edition Mini 8IGHT RTR 4WD Buggy
Losi Limited Edition Mini 8IGHT RTR 4WD Buggy

The Limited Edition Losi® Mini 8IGHT™ buggy features an official Dakotah Phend or Adam Drake body, plus everything you need to get started, including transmitter, rechargeable NiMH battery pack and charger. Based upon the four time ROAR-Championship-winning 8IGHT buggy, this brushless-powered prodigy is the ultimate mini buggy. Its 1/14-scale size allows it to handle tougher terrain while mastering the outrageous power and speed from the Dynamite® Brushless Waterproof system and Spektrum™ waterproof SR200WP receiver.

Features
• Dynamite® 4500Kv brushless motor and waterproof ESC
• Spektrum™ SR200WP Water Proof receiver with 2.4GHz DSM® technology
• Spektrum™ DX2L Radio
• 7.2V 1100mAh NiMH battery pack with EC2™ connectors
• 4WD shaft-driven drivetrain
• Front and rear metal gear differentials
• Mini servo with saver
• Aluminum, threaded, oil-filled, coil-over shocks
• Heavy-duty, 2.5mm anodized aluminum chassis
• Mini Kingpin™ treaded tires
• 2.5mm aluminum shock towers
• 12mm wheel hexes
• Aluminum motor mount
• Heavy-duty adjustable turnbuckles
• Chassis dirt guards
• Limited Edition Dakotah Phend Body

Product Specifications
Type:4WD buggy
Scale:1/14
Length:11.49 in (292mm)
Width:8.03 in (204mm)
Height:4.33 in (110mm)
Wheelbase:7.32 in (186mm)
Weight:2.15 lb (0.98 kg)
Chassis:2.5mm anodized aluminum
Tire Type:Kingpin™ buggy
Motor or Engine:4500Kv brushless motor
Speed Control:Brushless
Radio:2.4GHz DSM® technology
Batteries:7.2V NiMH with EC2™ connector
Charger:Included (not sold separately)
Kit/RTR:RTR
Shock Type:Aluminum, threaded, oil-filled
Ball Bearings:Complete
Minimum Age Recommendation:14 years

LOS01001 & LOS01002 Losi Mini 8IGHT, Limited Edition RTR: 1/14 4WD Buggy
MAP – $259.99

[source: www.losi.com]

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC is extending their product selection, this time with a full line of wheel …