Thursday , 21 November 2024

Mugen Seiki MBX6R Nitro Buggy

Mugen Seiki MBX6R Nitro Buggy
Mugen Seiki MBX6R Nitro Buggy

Mugen Seiki is proud to introduce the MBX6R based off the ultra successful MBX6 buggy. The 6R contains many ultra high performance parts that the Mugen Seiki design team has created. Team Mugen Seiki driver Robert Batlle used the MBX6R to dominate and win the 2011 EFRA 1/8 Off-Road European Championship.

The MBX6R has an awesome list of performance parts making it the best and most technically advanced Mugen Seiki 1/8 Nitro Buggy ever. The MBX6R is equipped with a new 5mm longer hard anodized chassis and a forward mount receiver battery tray. The combination of both the chassis and forward mount receiver battery will increase handling in all bumps and jumps. The total stability will increase which means you can drive the MBX6R harder and faster.

To further improve the handling of the MBX6R a new set of front and rear damper springs and chassis braces are included. An aluminum rear toe in block with various toe in & anti-squat adjustments, an aluminum front upper suspension arm hold with adjustable roll-center positions which will keep the MBX6R dialed in to all race conditions.

To give the MBX6R the finishing touch a newly designed cab forward body called
“The Force” by Bitty Design and the ever popular Mugen black wing is included in this kit. Take your racing to the next level and race what champions race…the MBX6R!

Features include:
• Newly designed graphite forward mount receiver battery tray (E0330)
• Newly designed graphite radio tray (E0329)
• Newly designed aluminum receiver battery tray mounts (E0331)
• Aluminum front upper suspension arm holder (E0177)
• Lightweight hard coated 44T spur gear (E0233)
• New front and rear chassis braces (E0188)
• New lengthened adjustable steering tie rod with 4mm square adjustment area (E0838)

Mugen Seiki MBX6R Nitro Buggy Chassis Shot
Mugen Seiki MBX6R Nitro Buggy Chassis Shot

Part #: E0080

[source: www.mugenracing.com]

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC is extending their product selection, this time with a full line of wheel …