CompetitionX CompetitionX is the most up-to-date source for RC Car News, Reviews and Videos for Radio Control. We also have the most comprehensive Manual Database on the web.
4×4 Short Course racing pushes the limits of your equipment. To combat the high temps and demands of the modern 4×4 Short Course race day, Novak is introducing the Vented Ballistic 550 Brushless Motor- 4.5T (#3504V). This is the same motor that has been powering drivers to the top of short course podiums across the racing world, but with the added value and performance of Novak’s vented end bells. The vents allow the motor to release the hot air which reduces the motor’s operating temperature and increases the motor’s overall performance.
Specification:
#3504V VENTED BALLISTIC 550 MOTOR SPECS
Design: Sensor-based
Motor Turn: 4.5
Input Voltage: 2S LiPo
Kv (unloaded): 5,000 RPM/Volt
Watts: 890
Motor Size (540): 2.84” x 1.41” (72.1 x 35.8mm)
Motor Weight: 9.8 oz (277.8g)
Shaft Diameter: 5mm
Rotor: Sintered Neodymium
Features:
• Twice the stator length of 540-size brushless motors for extreme power and torque needed for 4×4 Short Course vehicles, monster trucks, and extreme power enthusiasts
• Vented end bells for cooler operating motor temperatures resulting in faster speeds and longer run-times
• Sensor-based system for excellent torque and low-speed driveability
• Oversized 5mm front bearing for increased load handling and bearing life
• Rebuildable design with replaceable sensor harness, rotor, sensor board, hand-wound stator, sleeve, both end bells, ball bearings, and hardware
• Adjustable motor timing to allow fine tuning of motor feel and power band
• Removable shielded sensor harness plugs into a silicone-sealed gasket to keep dirt and debris from damaging the motor’s sensor plug, and keeps your sensor harness secure
• Nickel-plated, sintered Neodymium rotor with a rugged 5mm output shaft that is compatible with Novak Mod 1 and 32-pitch steel pinion gears
• Designed to meet ROAR specifications for 4WD Short Course racing
• Carries Team Novak’s commitment to excellent quality, support and warranty (120 days)
• Designed and manufactured by Team Novak in Irvine, California using the best components from around the globe. All brushless motors are 100% tested to ensure your product works right out of the box and on the track!
[source: www.teamnovak.com]
