Thursday , 21 November 2024

Sky Hero Anakin Club Racer RTF

Sky Hero Anakin Club Racer RTF

Sky Hero’s Anakin is a pretty cool looking racing drone – the name fits it perfectly. Well, now you can get this little guy as a RTF Club Racer!

The Anakin Club Racer has essential features for racing; flat arms for impact resistance, easy electronics replacement and very low drag for higher top speeds. It comes available in 5 different flavors, each allowing you to choose the level of racer you want – from a naked frame to a full blown RTF chassis!

Motors
The Club Racer includes high performance, hand-wound XNOVA X2204 2300kV brushless motors spinning 5×3.5″ – 5×4.5″ props. This combination is capable of delivering 342W with very log cogging torque.

ESC
Known for their precise power and reliability, the Club Racer comes equipped with LITTLEBEE 20A, brushless heli ESCs.

CC3D
Tiny in size, the CC3D is encapsulated in an aluminum box and can run on Open Pilot, Libre Pilot, Tau Labs, Clean Flight, Beta Flight or Race Flight.

CAMERA
The camera is your eyes so, for the best FPV experience, a Sony 28mm HS1177 600TVL CCD camera is included. It comes pre-tuned so there is no setup required.

215 – 5″ Naked Frame
The Kit version of the small Club Racer allows a total freedom in choosing the right components according to your usage.
• Complete frame unassembled
• Motors & Esc’s not included
• Flight controller not included
• Tx & Rx (Radio) not included
• Camera & VTX (video transmitter) not included
• Battery & charger not included
• No PDB

215 – 5″ Almost Ready To Fly
ARF version is pre-assembled and tested. You just need to instal your own RX (radio receiver) and VTX
• Complete frame assembled
• Motors & Esc’s included
• Flight controller included
• Camera included
• Battery & charger not included
• VTX (video transmitter) not included
• Tx & Rx (Radio) not included

260 – 6″ Naked Frame
The Kit version of the big Club Racer allows a total freedom in choosing the right components according to your usage.
• Complete frame unassembled
• Motors & Esc’s not included
• Flight controller not included
• Tx & Rx (Radio) not included
• Camera & VTX (video transmitter) not included
• Battery & charger not included
• No PDB

260 – 6″ Almost Ready To Fly
ARF version is pre-assembled and tested. You just need to install your own RX (radio receiver)
• Complete frame assembled
• Motors & Esc’s included
• Flight controller included
• Camera included
• Battery & charger not included
• VTX (video transmitter) not included
• Tx & Rx (Radio) not included

260 – 6″ Ready To Fly
Assembled, flight tested, quality checked
• Complete frame assembled
• Motors & Esc’s included
• Flight controller included
• Tx & Rx (Radio) included
• Camera included
• Battery & charger not included
• Link9 Radio mode 1 or mode 2
• VTX 25-200MW
• 40 CH raceband
• 3blade nylon props 60×40/black
• Librepilot upgraded

Additional options are also available depending on your budget.

[source: www.sky-hero.com]

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC is extending their product selection, this time with a full line of wheel …