Thursday , 21 November 2024

VP Pro 1/8 Scale Tires – Turbo Trax 2.0 Evo and Striker 2.0 Evo

VP Pro 1/8 Scale Tires - Turbo Trax 2.0 Evo and Striker 2.0 Evo
VP Pro 1/8 Scale Tires – Turbo Trax 2.0 Evo and Striker 2.0 Evo

VP Pro has just released two new sets of killer 1/8 Scale tires; the Turbo Trax 2.0 EVO and Striker 2.0 Evo.

VP804 Turbo Trax 2.0 Evo 1/8th Scale Buggy Tire
This tire is similar to the original Turbo Trax but has been completely redesigned for improved performance all around. The center row of small pins has been removed to allow the larger bar pins to dig in and provide better forward traction and acceleration. The remaining pins have been down sized to provide stability on hard pack blue grooved clay & dirt tracks and more able to cut through dusty & loamy surfaces due to extra pin spacing. The inside has also been changed with an all new carcass design. The new Turbo Trax has the criss-cross carcass like the Gripz and Blade Evo tire, but also has 3 ribs for even more stability. The 3 ribs help keep the closed cell foam insert in place and keep the new softer compounds from ballooning up under high RPM’s.

VP803 Striker 2.0 Evo 1/8th Scale Buggy Tire
This 1/8th Scale Buggy Tire design is based off the all new Turbo Trax 2.0 Evo Tire and includes the same carcass. The Striker 2.0 Evo pins are a tapered square medium size lug for use when a small pin tire will not provide the desired traction and stability or tread life. These work exceptionally well on hard packed dusty surfaces as well as loose loamy surfaces. This low profile carcass design provides maximum steering and rotation while providing the stability and traction required for speed around any 1/8th scale race track. The Striker 2.0 Evo 1/8th scale tires also include the all new MF-005 Closed Cell Foam Inserts.

Both of these tires are available in multiple compounds for any track surface and traction you race on!

[source: www.vpprousa.com]

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC Wheel Nuts and Hex Adapters | CompetitionX

UpGrade RC is extending their product selection, this time with a full line of wheel …