The Build – Part 2
The next setp involves installing the steering servo into the truck. I can definitely say this is the most involved steering servo install I’ve ever done, but it is quite cool! This thing isn’t going anywhere!
Build Notes: I am using one of Futaba’s killer brushless servos, the BLS157HV. Only the best for my stadium truck.
It’s a good idea to pick (and test fit) the correct servo horn prior to starting this step. This makes this step easier and helps keep the build moving along smoothly.
It is also a good idea at this point to center your servo. You can do this by hooking up your electronics package, turning on your transmitter and making sure the servo is centered.
Team Durango DEST210R Build – Step 9
Start this step by installing the ballend into the correct Servo Horn.
Team Durango DEST210R Build – Step 10
Attach the Servo Horn to the servo and use the screw that came with your servo. Again, make sure your servo is centered before attaching the Servo Horn.
Team Durango DEST210R Build – Step 11
The servo in the DEST210R is angled (unlike most off road cars where just the Steering Bellcranks are angled). Secure the servo to the Servo Mounts but do not tighten down the screws yet.
Team Durango DEST210R Build – Step 13
Build the Servo Drag Link with a 2mm gap per the instructions. Now snap one end of it onto the ballend on the Servo Horn.
Team Durango DEST210R Build – Step 12
Mount the Servo Mount-Servo Mounts to the chassis. These key into small nubs on the chassis.
Team Durango DEST210R Build – Step 14
Take your servo assembly and slide place it in the chassis, sliding it down into the slots as shown. If it seems difficult, loosen the chassis-mounted Servo Mounts and try again.
Team Durango DEST210R Build – Step 15
Secure the servo with the two 3x10mm screws. You can re-tighten the screws to the chassis-mounted Servo Mounts if you loosened them in the last step.
Team Durango DEST210R Build – Step 16
Tighten down the Servo Mount screws.
Team Durango DEST210R Build – Step 17
Snap the Servo Drag Link onto the Steering Rack.
Tony Phalen -
As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!
CompetitionX CompetitionX is the most up-to-date source for RC Car News, Reviews and Videos for Radio Control. We also have the most comprehensive Manual Database on the web.
I am using one of Futaba’s killer brushless servos, the BLS157HV. Only the best for my stadium truck.
