Tag Archives: 1/10 scale

The Build – Part 3 The Team Associated B44.3 uses a ball bearing supported, dual bellcrank system for the steering. This is a simple step and should only take you a few minutes to do. …

The Build – Part 2 Part 2 of the Team Associated B44.3 build has us assembling the front and rear gearboxes; installing the diffs and building the center CVAs. Build Notes: You’ll want to pay …

The Build – Part 9 The final step to our Vaterra Ascender K5 build has us attaching the front and rear bumpers, side bars and wheel/tire assemblies. We’ll also be installing the body mounts however …

The Build – Part 1 The B44.3 uses 3 gear differentials; one in the front, one in the center and one in the rear. All 3 of these are fluid-filled and can be tuned to …

The Factory Team B44.3 is the third generation 4WD buggy from Team Associated. This platform has already generated a whopping 3 IFMAR World Championships and 4 ROAR National titles, not to mention a slew of …

The Build – Part 8 Now that we’ve put the links on the axles, we need to attach the axles to the chassis. This appeared like it might be a little crazy with all the …

Hot off the heals of the APEX Scion Drift car, Team Associated has added another option to their Qualifier Series – the APEX Scion Racing tC. This Scion comes Ready to Run, complete with a …

The Build – Part 7 Next up on our Vaterra Ascender K5 Blazer build are the suspension links. We’ll be building 2 pair for both the front and the back as well as the panhard …

The Build – Part 6 Part 6 of our Ascender K5 build has us assembling the shocks. Vaterra was nice enough to give us some good, threaded shocks that are easy to build and work …

The Build – Part 5 The manual has us assembling the chassis and installing the electronics in the same step but I chose to break it out into two for simplicity sake. Vaterra has given …