Tag Archives: 4wd

The Build – Part 1 The B44.3 uses 3 gear differentials; one in the front, one in the center and one in the rear. All 3 of these are fluid-filled and can be tuned to …

The Factory Team B44.3 is the third generation 4WD buggy from Team Associated. This platform has already generated a whopping 3 IFMAR World Championships and 4 ROAR National titles, not to mention a slew of …

The Build – Part 8 Now that we’ve put the links on the axles, we need to attach the axles to the chassis. This appeared like it might be a little crazy with all the …

The Build – Part 7 Next up on our Vaterra Ascender K5 Blazer build are the suspension links. We’ll be building 2 pair for both the front and the back as well as the panhard …

Ever wondered what it would be like if you could ‘super-size’ one of your favorite RC cars? Well wonder no more … meet Axial’s Yeti XL! The Yeti XL is a cross between a desert …

The Build – Part 6 Part 6 of our Ascender K5 build has us assembling the shocks. Vaterra was nice enough to give us some good, threaded shocks that are easy to build and work …

The Build – Part 5 The manual has us assembling the chassis and installing the electronics in the same step but I chose to break it out into two for simplicity sake. Vaterra has given …

The Build – Part 4 The chassis on the Ascender K5 is very similar in design to other scalers, however Vaterra has added a bit of a twist. Instead of 2 frame rails, they’ve included …

The Build – Part 3 Part 3 of the Vaterra Ascender K5 build involves assembling the rear axle. This process is very similar to the front axle with just a lot less parts. You should …

The Build – Part 2 In Part 2 of the Vaterra Ascender K5 build, we’ll be working on the front axle. This includes the axle, gears and steering system. The K5 uses a standardized front …