Tag Archives: competitionx

Hello fans, and welcome to the March edition of the Eat Sleep RC custom giveaway build. I’m Tony Phalen, and this month we’ve teamed up with Axial to showcase and give away one of their …

Performance Parts for Your Dromida MT4.18 Monster Truck For this installment of Hop Up Corner, we’re going to check out some of the best upgrades for your Dromida MT4.18 RTR Truck. This little guy is …

At first glance, you’ll notice a pretty significant drop across the board – let me just start by saying that these numbers are, thankfully, not accurate. In an effort to boost my site’s speed rating, …

Beef up the front end of your XRay XB4 with these beautiful aluminum caster blocks from Exotek Racing. These blocks offer 12° of caster and weigh in at a light 6 grams each. They are …

The TC7 is Team Associated’s latest asphalt blazer, and we got our hands on one to do a full online build. Included in this build will be a full set of Reedy electronics, a Futaba …

The Build – Part 8 I am lucky enough to not only get one of Team Associated’s TC7s, I’m also able to load it up with a full set of Reedy electronics! In addition, I’ll …

The Build – Part 7 The Team Associated TC7 comes with front and rear anti-roll bars, both of which are very easy to assemble and install. Follow along. While the mounting point is slightly different, …

The Build – Part 6 In Part 6, I will be attaching the shocks, front bumper and battery mounting parts. Easy peasy. Quick and easy, right? Getting closer – just two more steps to go! …

The Build – Part 5 Part 5 of the Team Associated TC7 build has us assembling the drivetrain; installation of the steering and rear hubs. We’ll also be using the turnbuckles we built earlier. Look …

The Build – Part 4 In this step I’ll be installing the one-piece center bulkhead, spur gear and belts. I’ll also be installing the front and rear differentials as well as the shock towers. A …