Tag Archives: r1 wurks

R1 Wurks has dropped a set of add-on capacitors for their Digital 3 ESC that are designed to maximize performance by holding up to 30x the power over the built-in cap. They come in 3 …

Got the heat building up inside your ride? Check out the new 8.4v aluminum-cased low profile fan from R1 Wurks! This fan is 30mm in size and designed to fit in tight spaces to help …

R1 Wurks is getting into the No Prep scene with the addition of these 3.5T and 4.5T Drag Racing motors! These motors are based on their V16-series line and will come in two flavors – …

New from R1 Wurks is this 6-piece titanium screw kit for their V21-series motors. These kit includes 3 timing and 3 can screws, all ground from Grade 5 titanium. They basically help to reduce the …

In this final step of the Tekno EB410.2 build, we’ll be installing the body mounts, wing, wheels and tires and body. Quick and easy so we can get it on the track for some fun! …

The Tekno EB410.2 can accept most major electronics; tall or short servos and normal sized receivers. Most brushless ESC’s fit as well, however you might need to get creative if they come with external capacitors. …

Tekno’s EB410.2 uses a top-of-the-line set of big bore shocks. They include aluminum threaded bodies, bottom-load cartridges, massive plastic caps (with integrated bleeder hole) and a grub-screw lower portion that keeps the lower spring retainer …

In this step, we’ll be attaching the front clip, the rear clip and the center diff to the chassis. Easy peasy, right? Your Tekno EB410.2 is starting to take shape! Good job – let’s move …

The front suspension build on the Tekno EB410.2 is very similar to the rear; anti-roll bar, aluminum arm mounts will plastic pills, etc. We will also be installing the caster and steering blocks as well …

The rear suspension on the Tekno EB410.2 is similar to the .1; beefy arms, anti-roll bar, aluminum arm mounts with press-in plastic pills, etc. The biggest difference is that the shocks are now mounted to …