Tag Archives: team associated

The Build – Part 4 The rear suspension on the Team Associated Factory Team F6 uses a floating pod system. A center shock, links and side dampers control movement through the corners. The center pivot …

The Build – Part 3 The Team Associated F6 has 3 different steering options; 2 bellcrank setups (long and short) and a forward-servo system. The foward-servo system has been used by a lot of other …

The Build – Part 2 Part 2 of our Team Associated F6 build revolves around the steering and servo install. This car accepts both standard and forward mounted servos as well as a long or …

If you’ve got a Team Associated B6 or B6D and crashing is something you’re good at, you might want to check these two new bumpers from RPM RC Products; a mini and a wide front …

Team Associated has jumped straight into the F1 market with the release of the Factory Team F6. This is a full-blown F1 racer loaded with carbon fiber and anodized aluminum parts. Due to AE’s successful …

Take your new Team Associated F6 to a new level of cool with this red LED Tail Light. The light comes pre-wired for a simple Plug-N-Play operation. Insert the plug into an open port on …

If you’re running a 3-gear laydown transmission setup in your Team Associated B6 and not sporting a gear cover, chances are you could be in for trouble if you crash (or someone crashes into you) …

Team Associated hasn’t forgotten all you carpet/turf folks – the new B64 Team Kit is the same awesome car with specific parts for high bite carpet tracks! Changes from the B64D are small; center slipper …

AVID RC’s new Triad Steering Axles are made from 7075-T6 aluminum and are 1mm narrower than the stock parts. This aids in performance and includes 1mm shims (for both sides) to set the width back …

Team Associated has added another RTR to the lineup – the RC10T4.3! This was the truck to have back in the rear-motor era and now you can own it fully loaded with Reedy gear; a …